HVR
DOME
PTZ Instruction Manual EN
SpeedDome ID-6827X
FaceID F710 Device User Manual
WinCam
WinCam

 WinCam screen monitoring solution Update Instructions

When you install WinCam on a specific computer, set IP-MAC binding on your IP sharing device so that on networks with DHCP, your computer may have a stable connection with the video recorder.

(If you’re using static IP, skip this section)

Installation instructions for the custom version of WinCam screen monitoring solution 

Installation and registration

1. Download setup file WinCam.exe to    to the computer where WinCam is to be 
installed

2. After execution, a .cer file  wincam.cer  specific to the computer will be produced along with a .bat file  wincam.bat and a log folder  named log

3. Send the .cer file via email to service@faceid.com.tw in order to obtain a .key file wincam.key from us

4. Place the wincam.key file which we will give you in the folder containing the .exe file.


5. Restart the computer. WinCam will automatically run  in the background.

6.  You’re able to find the software version under task manager.

     ===================================================

    

     Find Wincam under task manager, right click on it and choose properties  

    

    You’re able to find the version of WinCam under details tab

    


     Proceed to the second stage of setup. Our goal is to setup the video recorder so it shows the screen of  the        
     computer with WinCam installed on it.


     On the video recorder go to channel settings and set the ID/IP to the following format 00000ABC
     
     
On the video recorder go to channel settings and set the ID/IP to the following format 00000ABC

For example

The IP address of the video recorder = 192.168.1.200

The IP address of the computer with WinCam installed = 192.168.1.101WinCam computer

Set the channel ID/IP of any particular channel to 00000101

The computer screen will then immediately show up on the specified channel on the video recorder.     

===================================================

When you install WinCam on a specific computer, set IP and MAC address binding so that on networks with DHCP, your computer may have a stable connection with the video recorder.




WinCam Update Instructions


1.
 Delete wincam.bat batch file



2. Under processes of task manager, select WinCam.exe and terminate it



3. Delete WinCam.exe file



After deletion



4. Copy the latest version of WinCam executable into the folder



5. Double click on WinCam.exe creating a wincam.bat file. Restart your computer afterwards.



__________________________________________________________________________________
 

Custom version of WinCam screen monitoring solution WinCam

Installation and registration

1. Download setup file WinCam.exe  to the computer where WinCam is going to be installed

2. 
After execution, a .cer file  wincam.cer specific to the computer will be produced along with a .bat file wincam.bat  and a log  folder named log

3. Download .exe file  of WinCam to the computer to be installed.

4. After execution, a .cer file  wincam.cer specific to the computer will be produced

      Send the .cer file via email to service@faceid.com.tw in order to obtain .key wincam.key  from us

5. Place the wincam.key file which we will give you in the folder containing the .exe file.

      

6. Run WinCam, mouse over to the icon on system notification area, a balloon showing Wincam running will pop up indicating that the operation is running


     

If a balloon popping up says “Wincam Not Active”! It means the .key file is not compatible with the computer’s hardware specs. Please ensure that the current state of the computer is the same as when the .cer was first generated. Please ensure there have been no hardware changes since. Also ensure the network card has not been disabled […]

     

Move the mouse over to the Wincam icon, right click on it, and you’ll be able to see the version of Wincam

     

Upon running of WinCam

Proceed to the second stage of setup. Our goal is to setup the video recorder so it shows the screen of the computer with WinCam installed on it.

In the channel settings of the video recorder, set the ID/IP of the computer with WinCam installed on it to the following format V0000ABC

V indicates custom protocol

ABC = The last part of the IP address of the IPCAM; keep the first three parts of the IP same as the video recorder

For example

The IP of the video recorder = 192.168.1.200

WinCam computer’s IP = 192.168.1.101

Set the channel ID/IP of any particular channel to V0000101

The computer screen will then immediately show up on the specified channel on the video recorder and go into full-time recording.